The HP Latex R Series (including the new R530) has revolutionized rigid printing with its vibrant colors, flexible inks, and high-speed production capabilities. However, as print speeds increase, a significant bottleneck emerges: material handling. If your operators are manually lifting, aligning, and removing heavy rigid boards all day, your production is limited by human endurance, not machine capability. To truly maximize your investment, you need HP Latex R Series automation.

The Challenge of Manual Rigid Media Handling

Printing on materials like foam board, Coroplast, Dibond, and acrylic is physically demanding. Operator fatigue from lifting heavy 4x8 or 5x10 foot panels continuously slows down the loading process and increases the risk of injury. Manually aligning heavy boards can result in skewed prints and wasted material. And the printer sits idle while operators retrieve new boards or move finished prints to a pallet.

Neolt Factory Automatic Feeder & Stacker

Fully automatic loading and unloading for rigid panels. Compatible with HP Latex R Series including R530. Customizable for different panel sizes. Made in Italy.

View Product →

How the HP R530 Feeder Stacker Works

1. A full pallet of blank rigid media is placed into the feeder unit.
2. The system uses suction cups to lift a single board, perfectly align it, and feed it directly onto the HP Latex printer bed.
3. The printer processes the board without operator intervention.
4. Once printed, the stacker unit gently lifts the finished board and places it onto an output pallet, ready for finishing or shipping.

The Benefits of Rigid Media Automation

Unattended operation allows your HP Latex R Series to run continuously, even during breaks or after hours, drastically increasing your daily output. Operators are freed from heavy lifting and can focus on higher-value tasks. Automated alignment ensures every board is printed perfectly square, reducing waste and improving overall quality.